(Winner gets a $25 Nike Card)
Conference play begins today
with #1 Alabama vs Vanderbilt!
Leave your predictions ⬇️⬇️⬇️
My Prediction: ALA 28 VU 10
BAMA FANS! Get $10 off your Alabama
Fanchest when you use the code
"BAMAFBALL" at checkout. The link
is in my bio! Go check them out!
🔹We initially sand and rough in all the body filler work with 36/40 grit. We do all this shaping and rough in work while the bondo is still setting up (green). 🔹By doing this it helps get the shapes established faster and makes it easier to sand the material straighter. It also makes your life a lot easier to blend new filler into previously dried filler. 🔹Rarely do we ever sand filler if it's actually dry until the very end where you're sanding finer for primer. 🔺🔺The trick is though to never spread new filler over 36 or 40 grit. While doing rough in work and you need re spread filler, make sure you sand it down first with 80 grit. Can do it by hand or at this rough in stage a DA with 80 on works good. This way the new filler is going over a smooth surface and doesn't have a chance to develop little pinholes and air pockets if you try to squeeze it in or over 36/40 grit. 🔹For what it's worth, it's an extra step but helps prevent any surprises down the road with shrinking issues. Finish the filler in 100-150 before primer though ✔️✔️ #therefinerybyadamkrause#theprocess#bodyshop#paintshop#bodywork#sanding#filler#bondo#autobody#refinish#restoration#thoghtsoftheday#corvette#3m#sata#refinisherporn